Novel Positioning Feedback System as a Guidance in Bone Tumor Resection.

Need: Bone resection using customized 3D-printed guides can improve accuracy, but the technique is still associated with clinically significant errors.Technical solution: We developed an inexpensive optical feedback system (OFS) that compares intraoperative 2D camera images to the pre-operative plan, and accurately depicts the surgeon's guide placement prior to cutting, reducing the errors in resection.Proof of concept: We simulated wide resections of a bone sarcoma on 24 cadaver femurs using 3 cutting guide types. Guide placement was measured using the OFS and compared to CT-scans showing the actual guide position. We carried out a second, controlled study on 20 sawbones, comparing the accuracy of the final bone cuts with and without the surgeon actively using the OFS to adjust the guide position before cutting.Results: For cadavers, in 2 of 3 planes, the position of the jig recorded by the OFS closely matched its actual position, with an accuracy of .87° ± .65°(r = .94) and 1.2° ± 1.3°(r = .81) in the transverse and sagittal planes, respectively. In the second study, OFS increased accuracy of the final cut about the transverse and sagittal planes, respectively by 53.1% (P = .011)/54.7% (P = .04) and 33% (P = .051)/38% (P = .042) in terms of rotation and translation.Next steps: Developing the OFS as a mobile application to reduce the processing time and improve accessibility in the operating room.Conclusion: The OFS could accurately depict the guide placement on the bone and significantly improve the surgical accuracy of 3D printed jigs.

A Novel 3D Light Assisted Drawing (3D-LAD) Method to Aid Intraoperative Reproduction of Osteotomy Lines Surrounding a Bone Tumor During Wide Resection: An Experimental Study.

Introduction: Computer navigation and customized 3D-printed jigs improve accuracy during bone tumor resection, but such technologies can be bulky, costly, and require intraoperative radiation, or long lead time to be ready in OR. Methods: We developed a method utilizing a compact, inexpensive, non-X-ray based 3D surface light scanner to provide a visual aid that helps surgeons accurately draw osteotomy lines on the surface of exposed bone to reproduce a well-defined preoperative bone resection plan. We tested the accuracy of the method on 18 sawbones using a distal femur hemimetaphyseal resection model and compared it with a traditional, freehand method. Results: The method significantly reduces the positional error from 2.53 (±1.13) mm to 1.04 (±0.43) mm (p<0.001), and angular error of the front angle from 2.10° (±0.83°) to 0.80° (±0.66°) (p=0.001). The method also reduces the mean maximum deviation of the bone resection, with respect to the preoperative path, from 3.75mm to 2.69mm (p=0.003). However, no increased accuracy was observed at the back side of the bone surface where this method would not be expected to provide information. Discussion: In summary, we developed a novel 3D-LAD navigation technology. From the experimental study, we demonstrated that the method can improve the ability of surgeons to accurately draw the preoperative osteotomy lines and perform resection of a primary bone sarcoma, with comparison to traditional methods, using 18 sawbones.

Patient expectations and satisfaction in robotic-assisted total knee arthroplasty: a prospective two-year outcome study.

INTRODUCTION: The impact of fulfillment of patient expectations throughout recovery on satisfaction in total knee arthroplasty (TKA) is not well understood. Utilizing a standardized TKA method with a robotically assisted (RA) platform, we investigated the impact of expectation fulfillment at 3-month (M) and 6-M on 1-year (Y) and 2-Y satisfaction. We hypothesize that early fulfillment of patient expectations is associated with improved midterm patient satisfaction. We also compare improvements in outcomes with RA-TKA to those of a recent large national TKA cohort study to determine whether RA-TKA meets or exceeds the current standard of care. MATERIALS AND METHODS: One hundred six patients were prospectively enrolled and underwent robotic-assisted TKA by a single surgeon using the OMNIBotics system. Patients completed KOOS and New Knee Society Score (KSS) preoperatively and at 3M, 6M, 1Y, and 2Y postoperatively. Expectation fulfillment was subdivided into patients who were below or above the average expectation score pre-operatively, or fulfillment of expectation score at 3M and 6M post TKA. The satisfaction of each group was then compared at 1Y and 2Y post TKA. Study cohort outcomes were compared to contemporary literature from the Function and Outcomes Research for Comparative Effectiveness in Total Joint Replacement (FORCE-TJR) database. RESULTS: Patients with greater than average KSS expectation fulfillment at 3M reported significantly higher KSS satisfaction scores at 1Y (34.9 ± 5.3 vs 30.6 ± 6.7, p = 0.0012), and patients with greater than average 6M expectation fulfillment reported improved satisfaction at 1Y (33.9 ± 5.9 vs 31.1 ± 6.7, p = 0.0330) and 2Y (35.2 ± 4.8 vs 32.4 ± 6.8, p = 0.0323). When compared to the FORCE-TJR database, no significant differences in post-operative KOOS outcomes were observed except for Sports and Recreation, for which the RAS group demonstrated higher scores (65.5 ± 30.0 vs 53.0 ± 27.1 p < 0.0001); however, the study cohort reported significantly greater improvements in KOOS Pain, Symptoms, Sports and Recreation, and Quality of Life at multiple time points up to 2 years post TKA. CONCLUSION: High early-expectation fulfillment was associated with improved satisfaction at 1Y and 2Y, indicating the importance of managing patient-specific post-operative care to ensure patients reach their pre-operative goals. Greater improvements in all KOOS sub-scores and in absolute Sports and Recreation at 1Y and 2Y were observed in this robotic-assisted cohort compared to a large contemporary database, indicating that RAS meets or exceeds current standard of care benchmarks for patient-reported outcomes.

Unicompartmental knee arthroplasty for spontaneous osteonecrosis of the knee: A meta-analysis.

BACKGROUND: Spontaneous osteonecrosis of the knee (SONK) is a poorly understood but debilitating disease entity. Total knee arthroplasty (TKA) is the standard of care for those patients who fail conservative management, but considering SONK's predilection for affecting a single knee compartment, unicompartmental knee arthroplasty (UKA) appears to be a more tailored option. Unfortunately, conflicting data exist on the utility of UKA in SONK. Thus, the purpose of this study was to evaluate functional outcomes and revision rates of UKA in the setting of SONK. METHODS: A systematic literature search was performed to evaluate all studies examining patients who underwent UKA for SONK. Screening of the articles was performed using multiple Boolean search strings, methodological index for non-randomized studies criteria, and other selected exclusion criteria. RESULTS: Seven studies were included, with a total of 276 knees (273 patients). The mean age was 68 years (64-74 years), with a mean body mass index of 26 kg/m2 (25-29 kg/m2). The final range of motion was 125° (124-126°). Standardized mean difference (SMD) of clinical improvement pre- and post-outcome was 3.39 ( p < 0.001). The improvement in the visual analog score was 57.03 points, with an SMD of 4.57 ( p < 0.001). Revision rates were determined to be 5.51% (95% confidence interval of 1.96-10.69%). CONCLUSION: Our meta-analysis demonstrated that in properly selected patients, UKA could be an excellent alternative to TKA for patients with SONK. These data show that UKA has few complications, significant improvements on functional outcomes, and good survivorship at a mean follow-up of 6 years.

A Biomechanical Comparison of Different Tendon Repair Techniques.

Previous studies have examined multiple suture techniques for the repair of ruptured tendons. In this study, we investigated how the two- and four-stranded Krackow suture weave techniques compared with a novel Krackow/Bunnell suture technique. Our hypothesis was that the Krackow/Bunnell suture would have greater strength compared with the two- and four-stranded Krackow suture in terms of resistance to pullout from the muscle tendon. Thirty fresh bovine Achilles tendons were assigned randomly to three groups: (1) two-stranded Krackow, (2) fourstranded Krackow, and (3) the Krackow/Bunnell combination. After suture placement, all specimens were subjected to initial cyclic loading (0-200 N for 200 cycles) and then the tension to failure force defined as the pullout through the muscle tendon was evaluated. Significantly greater deformation before suture failure was seen in the Krackow/Bunnell group compared with the four-stranded Krackow construct (36.2 vs. 28.7 mm, p = 0.009), as well as greater energy required to rupture the suture (4635 vs. 3346 N/mm; p = 0.016). There was no significant difference with regard to the force to failure between the two groups (four-stranded Krackow vs. Krackow/Bunnell). The two-stranded Krackow was found to be inferior to both the four-stranded Krakow and the Krakow/Bunnell techniques with regard to load to failure. We have found that the Krackow/Bunnell suture technique is at least comparable to, if not superior to, the four-stranded Krackow technique with regard to deformation before suture failure and energy required to rupture the tendon. Therefore, the Krackow/Bunnell technique may be an optimal construct if the surgeon is concerned about suture pullout through the tendon; however, future studies evaluating this technique in the clinical setting are required before making any final conclusions for patient use.